Private limited organization headed by Mr. O. Santhosh Kumar, and is the Director of this laboratory.
“Jancy Labs Pvt Ltd” is an independent ISO/IEC 17025:2017 certified laboratory that focus on delivery testing services to various civil industries, roads and building construction units etc.,
Jancy Labs Pvt Ltd, motto is to exceed the expectation of the customer requirements through a well knitted and organized laboratory quality system in delivering the customer, quality and reliable testing services.The laboratory was established in the year October 2018 named as Jay Aar Material Testing Lab (P) Ltd with a view to cater the services in the field of testing of building materials, rocks & soils for various civil industries, roads and building construction units with respect to Mechanical testing of Aggregates, Bitumen, Bitumen / Asphalt Mixtures, Cement, Soils and Rock materials etc.
To know more about our services click here.
This test determines the strength of aggregate, which is commonly used in the production of concrete. It entails compressing a known amount of aggregate with a single particle size in a mould and measuring the load necessary to convert 10% of the particles to fine material.
Testing of Bricks is performed both on the job site and in the laboratory. A variety of test on bricks is performed to verify their suitability for use in construction. Bricks are one of the oldest and most significant building materials due to their longevity, dependability, strength, and low cost. Bricks are construction materials made of clay and come in a specific size. Additionally, they are the foundational components of construction.
Reinforcing bars are used in reinforced concrete and are one of the main parts of R.C.C. structure. For that reason, quality of plain and deformed bars should be checked specially for yield, ultimate strength and elongation.
Quality tests on cement are carried out to check the strength and quality of the cement used in construction. It helps to identify the usage of cement for different purposes based on its durability and performance.
Concrete masonry blocks are generally made of cement, aggregate and water. Which are usually rectangular and are used in construction of masonry structure. They are available in solid and hollow forms.
Testing methods that do not compromise the structural integrity of the parts being tested are called non-destructive tests (NDT). NDT employs various inspection techniques to evaluate the components, individually or collectively.
The standard penetration test (SPT) is an in-situ dynamic penetration test designed to provide information on the geotechnical engineering properties of soil. This test is the most frequently used subsurface exploration drilling test performed worldwide.
Rebound Hammer test is a Non-destructive testing method of concrete which provide a convenient and rapid indication of the compressive strength of the concrete. The rebound hammer is also called as Schmidt hammer that consist of a spring controlled mass that slides on a plunger within a tubular housing.
The Network Survey Vehicle is based on the latest survey techniques utilizing Laser, Global Positioning System and Video image processing tools etc. The Survey Vehicle is used for automatic collection of road inventory and pavement condition related data required for Road Asset Management, Pavement Maintenance Management System and Road Safety Audit Related Studies.
Soil investigation must be undertaken to determine the bearing capacity of the soil, its settlement rate and the position of the water table. One of the easiest methods is to dig trial pits and visual inspections carried out then samples with minimum disturbance are collected for subsequent laboratory testing.
Traffic surveys aim to capture data that accurately reflects the real-world traffic situation in the area. It may be counting the number of vehicles using a road or collecting journey time information for example, but there are many other types of data that traffic surveys collect.
The Falling Weight Deflectometer is a device that is used to evaluate pavement and pavement layer stiffness. It is a trailer-mounted device that operates by dropping a weight on to the pavement and measuring the resulting pavement deflections.
We have exclusive categories to explore concerning the materials needed for the construction of the following sections.
All Quality control tests for materials used in road construction are tested according to standards approved by SH, NH, NHAI & PWD.
Quality control tests for materials used are done according to standards approved by SH, NH, NHAI & PWD.
Quality control tests for Building materials such as bricks, blocks, concrete, steel are done as per Indian standards.
Jancy labs has raised the bar among materials testing laboratories by following high standards to provide good quality and ensuring accuracy and timely results.
ISO / IEC 17025:2017
We jancy labs pvt ltd is a proud conformity assessment body recognised by NABL. Our test results issued are recognised and accepted Internationally across the borders by the international bodies like:
International Laboratory Accreditation Co-operation (ILAC) and
Asia Pacific Accreditation Co-operation (APAC).
Excellence in TestingRoad, Brodges & Building Materials
CONTACT US
This test involves in the measure strength and integrity, which helps in preparing concrete.
Asphalt Mix Design is a process through which we utilize three variables to attain an HMA that is deformation, fatigue, crack, and damage resistance
Our analysis of steel properties includes checking the hardness and strength thereby undergoing the tensile test, compression test, bending test, Torsion test, etc.,
Our cement quality involves analyzing the strength and quality of the cement thereby examining its purpose based on its durability and performance.
The testing of brick, block, and rock involve strength test, crushing, and water absorption quality. Our goal is to fulfil your quality requirements to complete a successful project.
The standard penetration test (SPT) is an in-situ dynamic penetration test designed to provide information on the geotechnical engineering
properties of soil.
The rebound hammer is also called as Schmidt hammer consists of a spring-controlled mass that slides on a plunger within a tubular housing.
Ultrasonic Pulse Velocity (UPV) is a family of non-destructive testing techniques based on the propagation of ultrasonicwaves in the object or material tested.
No.6, Ganesh Nagar 3rd street, Alagar koil Main road, Behind K.Pudur E1 police station, Madurai -07
+91 86800 49004
jancylabsmdu@gmail.com
No.6, Ganesh Nagar 3rd street,
Alagar koil Main road, Behind K.Pudur E1 police station, Madurai -07
+91 86800 49004
jancylabsmdu@gmail.com
